Interior details

I wanted to add some interest to the warehouse I'm building so I decided to model the building with one of it's 3 freight doors open. I then needed some interior details, but wanted to make sure that it appears that the building is quite large and has lots of storage, after all, it is a warehouse.

I decided to surf the web to find a suitable picture, that I scaled down and printed out. I glued the picture on a piece of scrap styrene and glued this a short distance behind the door opening.
To further create the illusion of depth, I will add some 3D details in front of the picture, and of course the door frames etc still need to be added too.
The overall effect is already quite good, so it gives me hope that the end result will look convincing.

Scratch building a warehouse

I needed a rail served industry for my module 'Wolter Springs', so I had a look around commercial kits that I could possibly use.
I found however that none would really fit the bill, and would need significant kit bashing to fit in the space I had planned for it.
It is at an angle and therefore the building, when viewed from the top would need to be largely triangular. I therefore decided to scratch build my own warehouse. It is entirely 'made up', I don't have a specific prototype for it, but I will make sure it will look 'authentic' enough not to look unrealistic. Besides, I had several scrap bits of styrene laying about that I could use.

Here is an 'in progress' picture of it's current status. This evening I've spend extending the structure , added a door and steps , re-enforced the inside of the walls and added a ledge on which the roof can be put down, and put a loading floor inside behind the doors. This will enable me to add a small amount of interior details that might be visible where the doors will be modeled open, but not the complete depth of the building.

SP at Napa Jct

I have put a bit more time into my home layout, and have finished the fence near the scrapyard, apart from weathering. See picture.

Also, I have moved my GP35 locomotive to the layout, I've swapped the decoder to a TCS T4X for the time being, and used the Lenz Gold that was present in it for my CP rail GP38-2. 

In future I will go for a sound decoder in this locomotive.  

Below is the GP35, at Napa Jct, on the spur to the loco service facility.

Wolter Springs update

Well here we are, my module Wolter Springs is slowly progressing.
I've just finished 'gluing' together the Faller grain silo kit I described before. I'm not done with it though.
first off, the structure just screams 'Plastic!!!' at me. It is therefore in need of paint and weathering to loose that plastic shine. Also some of the detail parts are quite coarse, so painting them darker will make that less obvious. The worst part is however that the loading tube, that runs from the top of the conveyor tower to above where a hopper would get parked, does not fit properly, and therefore was unable to be attached. Something went wrong in the dimensions at the factory. Also, some other parts didn't quite fit, or had warped a little bit. nevertheless, I think I can rescue this structure, and scratch build a couple of parts to make it look much better and hide the defects.

Next to it in this picture are my newly acquired F9 A+B, which also need some work. However they seem to run quite smooth in DC mode, so I'll now go ahead and identify the parts needed to super detail these, as well as a suitable (sound) decoder. This being a wide body diesel, I should be able to get a bigger size speaker in it (particularly in the dummy B unit), so it should sound quite good.

New Years resolutions

Happy New Year everyone!

It's this time of year that people set new plans/goals for the coming year. Some choose to go on a diet, others try to quit smoking etc etc.
I'm looking back at 2012 and noticed that I haven't posted as much as in year prior. While there have been personal issues in my life that have taken up leisure time, I could possibly have been a  bit more active.
I have to say that I have also posted on some other forums around the interweb, sometimes as part of a discussion, sometimes to report something new/relevant.
Of course this blog suffered a little, and therefore I've made the following resolution, and that is to post more frequently on this blog (obviously not for posting sake, but with some model railroad news, my progress on my two layouts (the CFNR / SP layout in the roof/loft of my house, and my Wolter Springs module), and other related topics.

I hope you will visit me regularly, and by all means post a comment / question or so, not only will that keep me on my toes and encourage me, it will also provide me with feedback for the blog.

By the way, I'm progressing slowly with my scenery, as below picture shows.
Thanks for visiting.

Boston & Maine layout

With what is my last post this year, I wanted to share the following layout that I found while browsing the net.
Perhaps it provides some inspiration for the coming modeling year.
It is located at another forum called the Whistle Post, and is being build by Australian modeler Mike C.
The link to the thread describing his layout is here, beware that it is already 47 pages long, be sure to browse through them to see how he does it, including where things didn't go quite right.  It's theme is Winter in New England, USA, the Boston and Maine area.
Go here to view: http://www.thewhistlepost.com/forums/ho-scale/11046-winter-new-england-mark-ii.html

Just in case you're wondering , the picture below is a model! Happy New Year!

Module rethink

Hi all, I hope you had a wonderful Christmas. Mine was the usual food and drink fest, spoiling the kids, and not many presents for myself, but that's okay. I wouldn't really know what to ask for and when it comes to trains, it is a bit awkward to ask for items that are not readily available in the local shop, but instead need to be ordered from specialist shops, and often it's pre-order/advanced reservation with no guarantee when it will get delivered.

anyway, I did purchase a set of Burlington Northern F9's, an A&B set, by Stewart Hobbies, these are used but in very good condition. I always wanted a good F unit set. These will need some super detailing, and weathering etc.
However getting these has caused me to rethink my Wolter Springs modules. Not that I will change their name, but instead change it's locale, to a more generic north-mid western theme.  This will be a better home for the CP GP38-2 and these BN F's .  My SP GP35 seen in the pictures when my module has featured here,  will then find service on my California themed home layout. So that's what I'll do.

Here are  the F9's.